Enhon 4-Pack H Track Dead End I Connector Replacement for WAC Lighting H Track Systems

Revised Content:

[Applicable Models]: The "I" type connector track accessory is a replacement for the H-type three-wire track. It is suitable for a voltage of 120V and measures 1.3 x 3.1 x 0.7 inches. This connector is a replacement for H-type single-circuit 3-wire track lighting connectors and H-type 3-wire 1-circuit tracks. Please purchase this connector after confirming the type of track you have.

[Easy to Install]: (1) Locate the grounding point between the connector and the track. (2) Confirm the correct direction and then connect the track and connector. (3) Tighten the screws. (4) The installation is complete. The replacement for the H-track dead end "I" connector is designed to minimize the track connection space and save space. No additional accessories are required, and it can be installed in just a few steps, easily solving the problem when you need to extend the track to cover more areas.

[Warm Reminder]: After installation, if the track system is not powered on, please check for the following abnormalities: 1. Whether the wiring hole on the back of the product is damaged, scratched, or has pierced the internal short wire. 2. Whether the "ground wire shrapnel" of this product has not been cut off as required. 3. Whether the access direction is wrong, and the "ground copper wire" inside the track is not touched, resulting in a lack of grounding.

[Replacement for H-Type Track]: This is a 3-wire 1-circuit (single-circuit) track lighting system. It has 3 metal clips, two on one side and one on the other. Replacement for H-tracks have three. The three types of track lighting parts do not mix and match. This product is not a replacement for L- and J-tracks.

[Quality]: The product is made using flame-retardant materials, making it safer to use. The quality is trustworthy.

product information: